Computer Training

Learn IT here Networking, MCSE, A+, Firewalls, Macromedia Flash Fireworks and Dreamweaver, Website development, Computer Skills development

Installation Process

1. Make sure the POWER is OFF and the main cord is unplugged. Even if you turn your computer off some system keep constant power. Unplug your cord to be safe.
2. Make sure your work area is appropriate. Uncarpeted is best because you don’t want to have ESD (Electro Static Discharge: static electricity ) harm your system. Ground yourself first because even a little ESD can cause a lot of damage
3. Remove case carefully unscrewing all the screws.
4. Find available slot which matches your card and insert it firmly into place. Screw in and replace your system cover
5. Plug your power cord back in and power on your system
6. Install driver
7. Test device and check device manager to see if there are any conflicts

To uninstall a device follow the same steps except step 4 where you would remove the peripheral device